Brother 8060P MFC-9060 - Manual (Page 37)

4
C H A P T E R F O U R
Initial
Setup
27
Getting Started
Setting the Dialling Mode (Tone/Pulse)
Your machine is initially set to TONE. If you are using a PULSE dial
line, you can change the setting to PULSE by following the steps below.
1 Press Menu , 1 , 1 .
The screen prompts you to select TONE or PULSE.
DIALLING:TONE
DIALLING:PULSE
2 Use or to select the dialling mode.
3 Press Set when the screen displays the dialling mode you want.
4 Press Stop to exit.
Setting the Date and Time
Your machine displays the date and time, and prints it on every fax you
send.
In the event of a power failure, the machine maintains date and time
information for about 12 hours. All other settings remain unaffected.
1 Press Menu , 1 , 2 .
The screen prompts you to enter the year.
ENTER YEAR:XX
2 Enter the last two digits of the year. The screen displays your entry.