Brother 8060P MFC-9060 - Manual (Page 32)

22
C H A P T E R T H R E E
Alternating Displays
When you see alternating, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions
about how to proceed. The display you’ll probably see most often is
shown below, showing you that when you place a document in the
feeder, you can either dial a number to send it as a fax or press the copy
key to make a copy of the document.
FAX: NO. & START
COPY: PRESS COPY
Function Selection Table
If you have a basic understanding of how to program your machine, you
can perform most of the programming settings without the Owner’s
Manual. To help you understand the function selections, options, and
settings that are available, use the Function Selection Table below.
1. INITIAL SETUP
Function Description Factory Set Chapter
1. TONE/PULSE Select the dialling mode. TONE 4
2. DATE/TIME Enter date and time for LCD -- 4
display and to print on
transmissions.
3. STATION ID Program the name, fax number -- 4
and telephone number to appear
on each transmitted page.
4. BEEPER Adjust the volume level of the LOW 4
beeps when you press a key, an
error occurs or a document is
sent or received.
5. PBX Turn on if this function if your OFF 4
machine is connected to PABX
(private automatic Branch
Exchange.)
6. CLOCK CHANGE Adjust the machine’s clock by -- 4
one hour for summer/winter
time.
7. SLEEP MODE Power save mode. 00 MIN 4