Brother 8060P MFC-9060 - Manual (Page 43)

33
I N I T I A L S E T U P
Setting the Ring Volume
You can adjust the ring volume when your machine is idle. You can turn
the ring OFF.
Press or to adjust the volume level. With each key press, the
machine rings so you can hear the current setting and the display shows
the setting you are choosing.
Each key press changes the volume to the next setting.
The new setting will remain until you change it again.
Memory Storage
In the event of a power failure, all settings in the INITIAL SETUP,
SETUP RECEIVE, SET QUICK-DIAL and REMOTE FAX OPT,
plus the COVERPG SETUP and COVERPAGE NOTE (from SETUP
SEND) functions are stored permanently.
TX Lock
This feature allows you to prevent unauthorised access to the fax
machine. When switched ON, TX Lock prohibits most functions. The
following functions listed are available while TX Lock is switched ON.
■ Receiving faxes
■ Answering & making telephone calls with an external telephone
■ Scheduled Delayed Transmission*
■ Polling*
■ Fax Forwarding*
■ Remote Retrieval
* Provided it was set before TX Lock was switched ON.