Brother 8060P MFC-9060 - Manual (Page 46)

36
C H A P T E R F O U R
3 Press Set . The screen prompts you to enter the password.
PASSWORD:XXXX
ENTER & SET
4 Enter a 4-digit password, followed by Set .
This is the same as the security password of your machine already
stored.
The screen displays ACCEPTED for 2 seconds, followed by TX LOCK
MODE - TX Lock is now switched ON.
If the password you enter at Step 4 is incorrect, the screen would display
WRONG PASSWORD. After 2 seconds the display will then return to
normal (displaying the date & time). You must then start from Step 1 to
set TX Lock.
Switching OFF TX Lock
1 When TX Lock is switched ON, press Menu .
The screen prompts you to enter the password, followed by Set .
PASSWORD:XXXX
ENTER & SET
2 Enter a 4-digit password and press Set .
The screen displays ACCEPTED, then after 2 seconds the display
reverts to normal. TX Lock is now switched OFF.
If the password you enter at Step 2 is incorrect, the screen would display
WRONG PASSWORD. After 2 seconds the display will then return to
displaying TX LOCK MODE. You must then start from Step 1 to switch
OFF TX Lock.
If you forget the TX Lock password, please contact your Brother dealer
for service.