Using relay outputs, Unlt see, Nor see – SATEC RDM172 Manual User Manual
Page 70: Dis see
Chapter 4 PAS Application Software
General Meter Setup
70
Series PM172 Powermeters
The debounce time is used the same for both digital inputs. If you change the
debounce time for one digital input, the same debounce time is automatically
assigned to the other.
Using Relay Outputs
The PM172 is equipped with two relays. Each relay can be operated either
locally from the alarm/control setpoints in response to an external event, or
by a remote command sent through communications, and can also be linked
to an internal pulse source to produce energy pulses.