5 troubleshooting – MacDon Double Windrow Attachment User Manual
Page 63
SECTION OM – OPERATOR’S MANUAL
Form # 169365
OM-39
Issue – May 2008
5 TROUBLESHOOTING
SYMPTOM PROBLEM SOLUTION
PARA-
GRAPH
Noisy Brakes
Under Adjustment
Adjust.
*
Broken Brake Components
Replace Components.
*
Incorrect Brake Components
Install Correct Components.
*
Locking Brakes
Loose, Bent, Or Broken Brake
Components.
Replace Components.
*
Faulty Controller.
Test And Correct.
*
Insufficient Wheel Load.
Adjust System Resistor And
Synchronize.
*
Under Adjustment.
Adjust.
*
Out-Of-Round Drums.
Machine Or Replace.
*
Transporter Pulls To
One Side
Incorrect Tire Pressure.
Inflate Evenly On Both Sides
To Correct Pressure.
4.3.3.1
Broken Wires.
Find And Repair.
-
Wrong Magnet Lead Wire.
Correct.
*
Unmatched Tires On Same Axle.
Match Tires On Same Axle.
4.3.2
Defective Or Damaged Shoe And
Lining.
Install New Shoe And Lining.
*
One Side Out Of Adjustment.
Adjust.
*
Brakes Dragging
Over Adjustment.
Adjust.
*
Out-Of-Round Drums.
Machine Or Replace.
*
Incorrect Brake Components
Install Correct Components.
*
Loose, Bent, Or Broken Brake
Components.
Replace Components.
*
Faulty Breakaway Switch.
Repair Or Replace.
*
Loose Wheel Bearing Adjustment.
Adjust.
*
Bent Spindle.
Replace Axle.
*
No Brakes
Severe Under Adjustment.
Adjust
*
Faulty Controller.
Test And Correct.
*
Short Circuits.
Find And Correct.
*
Open Circuits
Find And Correct.
*
(Continued next page)