MacDon Double Windrow Attachment - Manual (Page 54)

SECTION OM – OPERATOR’S MANUAL
Form # 169365
OM-30
Issue – May 2008
3.13 ATTACHING/DETACHING CA20
COMBINE ADAPTER
The combine and CA20 Combine Adapter may
be detached from the header and then re-
attached with the header loaded on the MT8
transporter. Refer to the CA20 Combine
Adapter Operator’s Manual for instructions.
3.14 STORAGE
Do the following at the end of each operating
season:
a. Clean the transporter thoroughly.
CAUTION
Never use gasoline, naphtha or any
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
b. Store in a dry, protected place if possible.
c. Repaint all worn or chipped painted surfaces to
prevent rust.
d. Apply grease to exposed threads, and sliding
surfaces of components.
e. Check for worn components and repair.
f. Check for broken components and order
replacements from your dealer. Attention to
these items right away will save time and effort
at beginning of next season.
g. Replace or tighten any missing or loose
hardware. Refer to SECTION G, Paragraph 2,
Recommended Torques.