MacDon Double Windrow Attachment - Manual (Page 16)

SECTION UA – UNLOADING AND SETUP
Form 169365
UA-2
Issue – May 2008
STEP 2. CONFIGURE THE
TRANSPORTER
The transporter must be set up to carry a
specific size and type of header. Refer to
applicable section for each model of transporter.
A. ONE-AXLE
The one-axle transporter is designed to carry D Series 25 ft, and 30 ft windrower headers using a truck or an
M Series windrower tractor. Determine the header that the transporter will carry and set up the transporter in
accordance with the following table: Refer to paragraph D, TRANSPORTER ADJUSTMENT PROCEDURES
for instructions.
IMPORTANT
The one-axle transporter is not designed to carry a 30 ft combine header. Do not exceed 5400 lb
(2452 kg) header weight. Ensure attachments and header weight conform.
DIMENSION inches (mm) D SERIES
HEADER SIZE
A B C
25’ 181.8 (4618)
30’ 162.1 (4118)
423.1 (10747) 4.84 (123)
A
B C
A
B
C
NOTE
Dimensions “A” and “B” are to forward edge of bolts.