MTS Series 793 Controller - Manual (Page 54)

MTS Series 793 Controller Overview
About Assigning Parameters to Station
Operation Concepts 54
About Assigning Parameters to Station Configurations
About Parameter Sets
In the pretest phase, you use the Station Manager application to optimize how the
parts of your system work together. A product of the pretest phase is a parameter
set that you save with the station configuration.
A parameter set adapts the way the resources in your station configuration
operate to suit your test requirements. Parameters include everything from tuning
values to detector settings. When you change these settings from their default
values, you create a unique parameter set for the station configuration.
Creating parameter sets. You use the Station Manager application to create Parameter
sets. Parameter sets define the operation characteristics of the resources in the selected
Station Config file. You can create up to 15 parameter sets for a Station Configuration.
Station
Manager
application Station
Config
file Parameter
set 1 Parameter
set 2 Parameter
set 3
Selecting Parameter sets. When you start the
Station Manager application, you select a Station
Config file, and then you select the desired
parameter set for the Station Config file.
Station Config
file paired with a
parameter set.
PARM
PARM
PARM
PARM
PARM PARM PARM