Lenze EMF2113IB User Manual
Lenze
Table of contents
Document Outline
- Communication manual EMF2113IB INTERBUS
- 1 Preface
- 2 Guide
- 3 Safety information
- 4 Wiring according to EMC
- 7 2113 INTERBUS fieldbus module
- 7.1 Contents
- 7.2 General information
- 7.3 Technical data
- 7.4 Installation
- 7.5 Commissioning
- 7.5.1 Before switching on
- 7.5.2 Possible settings with the front switch
- 7.5.3 Possible settings with INTERBUS master
- 7.5.4 Ensure that the settings match the 2111 fieldbus module
- 7.5.5 Commissioning of 2113 fieldbus module
- 7.5.6 Prepare controller for INTERBUS operation
- 7.5.7 Controller enable via DRIVECOM
- 7.5.8 DRIVECOM compatibility
- 7.5.9 Special features when using 82XX, 8200 vector and 93XX
- 7.6 Data transfer
- 7.6.1 Process data channel configuration
- 7.6.2 Process data signals of Lenze controllers
- 7.6.3 Process data preconfiguration depending on L-C0009
- 7.6.4 Examples for the configuration of PI/ PO data
- 7.6.5 Device control
- 7.6.6 DRIVECOM control
- 7.6.7 DRIVECOM profile parameters
- 7.6.8 Configuration of the parameter data channel (PCP communication)
- 7.7 Troubleshooting
- 7.8 Appendix
- 7.9 Index