beautypg.com

Landoll 3130 SERIES WING PACKER User Manual

Page 48

background image

4-7

ROLLERS

4-7.1

For maximum roller life, the rollers need to

touch each other across the gangs. This ad-
justment is made by loosening the u-bolts
which attach the bearing standards. The
bearing lock collars must also be loosened.
Bump the standard and the u-bolt toward the
center of the machine until the rollers touch
each other. Retighten the bearing lock col-
lars. Retighten the u-bolts to at least 200 foot
pounds of torque. Be careful not to put an
end thrust or side load on the bearings (See
Figure 4-2)
.

4-7.2

This adjustment will need to be made twice

during the first 200 acres of operation. After
the initial adjustments have been made, in-
spect the packer routinely and adjust rollers
when necessary.

4-8

ELECTRICAL SYSTEM AND REFLECTORS

4-8.1

All Wing Packers are designed to meet

current industry

location and visibility stan-

dards for conspicuity reflectors (See Figure
3-7).

4-8

Figure 4-2 Rollers