Landoll 3130 SERIES WING PACKER - Manual (Page 15)

3-2 AFTER ASSEMBLY - SAFETY
WARNING
1 . B E S U R E A L L N U T S , B O L T S ,
OTHER FASTENERS AND HYDRAULIC
FITTINGS ARE PROPERLY TIGHT-
ENED. REFER TO THE BOLT TORQUE
CHART.
2. BE SURE ALL SAFETY GUARDS
AND SAFETY LOCKING DEVICES ARE
IN PLACE AND FUNCTION PROPERLY.
CAUTION
BEFORE OPERATING THE MACHINE,
BE SURE TO READ THE SAFETY AND
OPERATION SECTIONS OF THE OP-
ERATOR’S MANUAL.
CAUTION
BEFORE DELIVERING THE MACHINE,
REVIEW MACHINE MAINTENANCE,
OPERATION AND SAFETY WITH THE
CUSTOMER.
3-3 ASSEMBLY INSTRUCTIONS
3-3.1 The terms “right” and “left”, “front” and
“rear”, refer to the machine as viewed by fac-
ing in the direction of forward travel.
3-3.2 Open all bundles. Do not mix parts of one
bundle with those of another. Place all bun-
dles where they will be easy to access.
3-3.3 Neatly arrange parts and tools within easy
reach of work area.
3-3.4 Use the correct grade of bolt in the proper
locations as indicated. Refer to the bolt
torque chart for descriptive markings on bolt
heads.
3-3.5 Check axle for end burrs or nicks which
may have occurred during shipping. Using a
flat file, smooth any rough areas to assure
ease of assembly.
3-3.6 After completing each assembly step, re-
view next step in procedure before proceed-
ing with that step.
3-3