Caution – Landoll 3130 SERIES WING PACKER User Manual
Page 23

3-12 PULL TONGUE ADJUSTMENTS (SMALL MODELS ONLY)
This machine is equipped with a pull tongue
that is adjustable up and down a total of 10-1/2",
as shown.
CAUTION
WITH THE WINGS FOLDED AND THE
UNIT IN THE TRANSPORT POSITION,
THE HITCH COULD SPRING UPWARD
WHEN UNHITCHED FROM THE TRAC-
TOR DRAWBAR.
3-12.1 Lower the machine to the working position
with the wings unfolded for stability.
3-12.2 Level the frame and securely block the
front and rear so it cannot tip. Also, block the
machine so it cannot roll forward or back-
ward.
3-12.3 Loosen the 3/4" bolts where the pull
tongue attaches to the center frame.
3-12.4 Remove the 7/8" bolts and shims.
3-12.5 Position the hitch point at the desired
height. The tongue jack can be used to ad-
just the height. The 3/8" thick shims allow a
total adjustment of 10-1/2" adjustment at
1-1/2" increments.
3-12.6 Replace the shims and the 7/8" bolts.
(Tighten to 350 - 400 ft.-lbs.)
3-12.7 Retighten the 3/4" bolts to 250 - 300
ft.-lbs.
3-11
Figure 3-9 Pull Tongue Adjustments (Small Models Only)
- 4630-36 Folding Seeder Operators Manual v.F-640-0513 05/2013 (36 pages)
- 4630-36 Folding Seeder Operators Manual v.F-640-0513 05/2013 (40 pages)
- 4630-36 Folding Seeder Parts Manual v.F-641-1213 12/2013 (76 pages)
- 4630-36 Folding Seeder Operators Manual v.F-640-0313 03/2013 (40 pages)
- 4630-36 Folding Seeder Parts Manual v.F-641-0313 03/2013 (70 pages)
- 4630-36 Folding Seeder Parts Manual v.F-641-0513 05/2013 (70 pages)
- 3K063_XL Wing to Center Frame Installation (1 page)
- 3K033_2K314 ASSEMBLY ADDENDUM (1 page)
- 3J061 BRUSH AGITATOR KIT FOR BRILLION SEEDERS Installation (2 pages)
- 2P112 MID-MOUNT HITCH KIT LAND COMMANDER III (4 pages)
- 2K778 BRACKET COIL TINE DRAG ASSEMBLY ON BRILLION MODEL CMD CULTIVATORS (1 page)
- SL ADDITIONAL SEEBOX DIVIDERS (1 page)
- PIVOT PLATE MID-SIZE LAND COMMANDER III (1 page)
- 1P153 - Electric Clutch Kit for Seeders (1 page)
- 1P120 PULL-TYPE LIFT ASSIST KIT (2 pages)
- 9K871 LIFT ASSIST KIT WITH 38 SHANK SPACING (2 pages)
- 164703 PT PULVERIZER WARNING LIGHT (12 pages)
- LCS9151 LANDCOMMANDER (7 pages)
- M-88 TRANSPORT LINK (2 pages)
- 3K997 AUXILIARY CYLINDER KNIT (2 pages)
- 3K915 (Soil Commander I) (1 page)
- 3K914 REAR HITCH KIT (1 page)
- 3K695 V-Leveler (3 pages)
- REAR CUSHION KIT for LANDCOMMANDER (5 pages)
- 5D045 CENTER CUT KIT (1 page)
- 4K647 FLAIR SHREDDER V-BELT (1 page)
- 5K977 TIRE TRACK REMOVER KIT (2 pages)
- 5K282 WARNING LIGHT KIT (2 pages)
- 5K145 WARNING LIGHT KIT (2 pages)
- W-360 Rear S-Tine Spacer (2 pages)
- 175116 Trunnion Bearing Retrofit Kit (14 pages)
- 174282 FRAME REPLACEMENT KIT (4 pages)
- 173531 FRAME STABILIZER KIT (10 pages)
- 171824 SHIM KIT (4 pages)
- 9K446 Hydraulic Conversion Kit (2 pages)
- ML SERIES TOOTH CONTROL KITS (22 pages)
- SMT-8 Seedbed Mulch Tucker (20 pages)
- 1446/1446-1 FS, FSC, FSB Series Flail Shredder (24 pages)
- BDH512 Double Seeder Hitch (38 pages)
- LSP5 Landscape Grass Seeder (34 pages)
- SL/SLB/SLP/SLPB/SLPB TURFMAKER III (58 pages)
- SL 8, 10, 12 Turfmaker Seeder (56 pages)
- M-1241 TRANSPORT PULVI-MULCHER (30 pages)
- ML/MLS/MLC 1483, 1643, 1803 RIGID PULVI-MULCHER (52 pages)
- ML2253 18,9 RIGID PULVI-MULCHER (46 pages)