INFICON STM-2 USB Thin Film Rate/Thickness Monitor - Manual (Page 45)

3 - 19
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
3.3.4 STM-2 Tab
Figure 3-15 STM-2 tab
Show . . . . . . . . . . . . . . . . . . . . . . . . Select the sensors to be displayed on the
STM-2 window.
Name . . . . . . . . . . . . . . . . . . . . . . . . Edit the name of the sensor. This name will
be displayed on the STM-2 window if
selected.
SN . . . . . . . . . . . . . . . . . . . . . . . . . . Use the drop-down list box to select the serial
number of the connected STM-2 associated
with the named sensor.
Line Color . . . . . . . . . . . . . . . . . . . . Use the drop-down list box to select a color
to correspond with each STM-2 connected.
NOTE: This will also change the Line Color
on the X Axis & Colors tab of the
Graph Settings window (refer to
Figure 3-7 on page 3-9 ).
Find/Refresh . . . . . . . . . . . . . . . . . . Click to Find or Refresh connected STM-2(s).