Despatch LEB Series - Manual (Page 59)

51
Stacking Kit Assembly Instructions
1. Locate the four stacking kit brackets found in the kit.
2. Place each of the brackets on top of each of the four corners of one of the lower
ovens in the stack being assembled. Slide the angle of each bracket into the
slots in the embossed area on top of the oven. See the illustration below for
placement.
3. Use the four 10-16 x .50 screws included in the kit to attach the brackets to the
oven top.
4. Place the upper oven onto the lower one. The embossed “feet” on the upper
oven should fit into the brackets attached in the last three steps.
Stacking Kit Assembly Components
Side View of Oven
10-16 x .50 screw
(1 per bracket)
Front View of Oven
Stacking kit bracket
(4 required)