Despatch LEB Series - Manual (Page 39)

31
Heater Unit
(Tools needed: 3/8” wrench, screwdriver, one-quarter (¼) inch socket set with
Torx drive)
1. Remove shelves.
2. Remove side ducts (right and left)
a. Remove screws from each duct.
b. Remove duct from oven.
3. Remove heater cover.
a. Remove screws from heater cover.
b. Remove heater cover from oven.
4. Disconnect heater leads from heater element with wrench. Note which
wires go on which terminals.
5. Remove screws holding the heater frame to the oven body.
6. Remove heater and discard.
7. Install new heater frame to oven body.
8. Attach heater leads to appropriate terminals.
9. Replace heater cover.
10. Replace side ducts.
11. Replace shelves.