Despatch LEB Series - Manual (Page 31)

23
Parameter Setup Mode
The HI-LIMIT parameters are set through the
Operating and Set-up modes. In most applications, it
is not necessary to alter the oven settings. The
following instructions describe how to access, view
and, if desired, change the parameters.
If the
on the HI-LIMIT is lit, press and hold the for four (4) seconds to
enable the and keys. The HI-LIMIT will automatically exit the Setup mode if
no keys are pressed for about two (2) minutes.
1. Press and hold the
key for four (4) seconds, the setup mode has now
been entered.
2. Press the
key until the desired parameter is
displayed. See the Setup Parameter Table on the
following page.
3. The display will alternate between the parameter
name and value.
4. Use the or to move to the desired setting.
5. Press the key, this enters the value and
advances to the next parameter.
6. To get out of the setup parameters press the key. The HI-LIMIT will
automatically exit the Setup mode if no keys are pressed for about two (2)
minutes.
WARNING: Make sure you
understand what you are
changing before doing so.
Changing the setup
parameters will alter the
functions of the HI-LIMIT.
HI-LIMIT Instrument