Despatch LEB Series - Manual (Page 19)

11
Setup
1. Place oven on a bench top or an optional stand.
The oven must have a minimum of two (2) inches clearance in the rear to
provide proper ventilation. The oven may be placed next to another cabinet,
or next to another oven, with three (3) inch clearance (the doors will still
open).
Make sure oven is level and plumb; this will
assure proper heat distribution and
operation of all mechanical components.
2. Identify correct power source indicated on
the specification plate.
3. Plug or hardwire oven directly to the electric supply.
WARNING: All grounding
and safety equipment
must be in compliance
with applicable codes,
ordinances and accepted
safe practices.