Despatch LEB Series - Manual (Page 58)

50
9. Apply power to oven, and follow instructions in the timer operation section.
Stand Assembly Instructions
1. Install four rubber grommets into holes in the stand. On LEB1-69 stands, the
rear grommets mount into the forward set of rear holes. On LEB2-12 stands the
rear grommets mount into the set of holes closest to the rear of the stand.
2. Place the oven on top of the stand. The four embossed areas in the bottom of
the oven should center in the grommets.
3. Using the self-drilling screw and large flat washer provided, install through each
embossed area as shown below.
Stand Assembly Components