Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 7)

Chapter 1: Control Panel
7
Chapter 1: Control Panel
The panel consists of 2 Function Keys (Online sets the printer to online/offline mode, Setup
enters setup mode) and 4 situation dependent soft keys (1, 2, 3, 4). The function of the soft keys
is denoted by the display. For further explanations of the control panel functions, please refer to
the User Guide of the printer.
On some printer models the menu may be locked. In order to enter the menu in this case, press
the Menu key (1) for approximately 5 seconds.
Basic Elements
Figure 1 - Control Panel Elements
NOTE: For further informations on the control panel please refer to the printers
Quick Start Guide or the User Guide on the Online CD-ROM.
1,2,3,4 “Soft Keys”
The function is denoted by the display
Online sets printer to online / offline
Setup enters set-up mode
2 x 16 Digit
LCD
1
Online
Setup
2 3 4