Plotting dot patterns, Igure, Atterns and – Dascom T2250 User Guide IGP for Dot Matrix Printers User Manual

Page 45: Dentifiers, Chapter 2: emulations

Text mode
Original mode

Chapter 2: Emulations

Plotting Dot Patterns

To construct the data code for a specific dot pattern and have the printer print that dot pattern,
refer to the table below and perform the procedure that follows.

Figure 16 – Dot Patterns and Identifiers

This manual is related to the following products:

T2150 User Guide IGP for Dot Matrix Printers T2265+ User Guide IGP for Dot Matrix Printers T2280+ User Guide IGP for Dot Matrix Printers T2365 User Guide IGP for Dot Matrix Printers T2365MC User Guide IGP for Dot Matrix Printers T2380 User Guide IGP for Dot Matrix Printers