Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 14)

IGP for Dot Matrix Printers User Guide
14
Parameter group Parameter Description
Charset CP437
CP850
CP852
CP857
CP860
CP861
CP863
CP865
CP866
CP1250
CP1251
CP1252
CP1254
Italic
Latin1*
Latin2
Latin9
Cyrillic
Turkish
SAP8859-1
HP Roman8 Selects the character set that defined the
characters in location 80 Hex to FF Hex.
Locations 20 Hex to 7F Hex will be the
standard ASCII characters.
LtMarg 1 to CPI X 13.6 Sets the left margin column. The maximum
value is a function of the CPI times the
printable area (13.6 inches)
RtMarg 1 to CPI X 13.6 Sets the right margin column. The maximum
value is a function of the CPI times the
printable area (13.6 inches)
Auto-CR Auto-CR = On
Auto-CR = Off* Switches the automatic carriage return on
or off after receiving the signal CR
Auto-LF Auto-LF = On
Auto-LF = Off* Switches the automatic line feed (LF) on
or off after receiving the signal CR
Line-Wr Line-Wr = Off*
Line-Wr = On Parameter will cause an automatic Carriage
Return when attempting to print data past the
right margin
Wrap-LF Wrap-LF=Off*
Wrap-LF=On
When this parameter and the Line Wrap
parameter are both set to ON, an automatic
Carriage Return and Line Feed will occur when
attempting to print data past the right margin
MenLock MenLock = Off
MenLock = Menu*
MenLock = All MenLock = Menu : Menu-key is locked
MenLock = All: Setup-, Paper-, Font,
CPI locked.
Printer power has to be toggled to activate
locking
The locked keys can only be re-activated by
holding the Setup-key while switching the
printer on.
Op Lang English*
German
French
Italian
Spanish The menu will be shown on the LC display in
the selected language.