Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 56)

IGP for Dot Matrix Printers User Guide
56
Sequence Function Description
ESC [ n !s Select
Character
Sets Selects the primary (G0) and alternate (G1) fonts and
character sets (languages).
ESC [ n sp B Select
Character
Size Selects the character height and width.
ESC [ n1;n2 !q Select Plot
Density
Selects the horizontal and vertical plot densities. Also
selects shuttle speed and spacing (speed and spacing
options are undocumented).
ESC [ n “s Set Margins Sets the left and right margins in 1/120ths.
ESC [ n sp p Partial Line Performs a partial (half) line advance up or down.
ESC [ f Reverse FF Backs paper up to the previous TOF.
ESC [ < 1 h
ESC [ < 1 l VFU
Download Begins and ends a VFU download.
ESC [ < 2 h
ESC [ < 2 l Font
Download Begins and ends a font download.
ESC [ < 3 h
ESC [ < 3 l Plot Mode Begins and ends plot mode.
ESC [ < n h Emulation &
Configuration
Switching Changes emulations when n = 10 - 39
ESC [ < n sp h Variable Line
Spacing
Sets the line advance distance in 1/720ths.
Figure 19 – MT660 Escape Sequence Summary