Igp for dot matrix printers user guide – Dascom T2250 User Guide IGP for Dot Matrix Printers User Manual
Page 10

IGP for Dot Matrix Printers
User Guide
10
Parameter group
Parameter
Description
Graphic
CVCC
1
:
94*
:
255
Defines the decimal ASCII character code for
the Code V Command Character
CV
Lang
SFCC
PG
Lang
PY
Then
PN
Then
US*
UK
Swe/Fin
Nor/Dan
Japan
French
Italian
Spanish
1
:
126*
:
255
ASCII*
German
Swedish
Danish
Norway
Finnish
English
Dutch
French
Spanish
Italian
Turkish
None*
All
Term
FreeFmt
None*
All
Term
FreeFmt
Defines the language substitution set for Code
V block characters.
Defines the decimal ASCII character code
between 1 and 255 for the PGL Command
Character (called the Special Function
Command Character by Printronix).
Defines the language substitution set for PGL
block characters.
Defines how data on the same line as the Code
V ^PY command is treated. The possible
settings are:
None
All data, plus the line terminator,
are
ignored.
All
All data is executed.
Term
All but the terminator is ignored.
FreeFmt
Characters on the ^PY line are
ignored if the state of FreeFmt is
On/Enabled in the Config Menu
"Graphics" "FreeFmt".
Defines how data on the same line as the Code
V ^PN command is treated. The possible
settings are:
None
All data, plus the line terminator,
are
ignored.
All
All data is executed.
Term
All but the terminator is ignored.
FreeFmt
Characters on the ^PN line are
ignored if the state of FreeFmt is
On/Enabled in the Config Menu
"Graphics"
"FreeFmt".