Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 65)

Chapter 2: Emulations
65
Command
Description Command Description
ESC [22 m Disable Bold ESC [>1 h Set Proportional Print
Mode
ESC [24 m Disable Underline ESC [>3 h Set C1 Control Code
Mode
ESC [10 m Select Data
Processing Font ESC [>5 h Set Character Set 2
Mode
ESC [11 m Select Data
Processing Font ESC [p1;p... l Reset Mode
ESC [12 m Select Character
Graphics Font ESC [11 l Reset Position Unit
Mode
ESC [13 m Select Gothic Font ESC [20 l Reset Line Feed New
Line Mode
ESC [14 m Select Courier Font ESC [>1 l Reset Proportional
Print Mode
ESC [15 m Select Draft Font ESC [>3 l Reset C1 Control
Code Mode
ESC [16 m Select OCR-A Font ESC [>5 l Reset Character Set 2
Mode
ESC [17 m Select OCR-B Font ESC P Begin Dot Graphics
Mode
ESC [18 m Select Italic Gothic
Font ESC [p1 b Repeat Character
ESC [19 m Select 13.3 CPI
Gothic Font ESC [p1;p2;p3 q Select Horizontal and
Vertical Graphics Dot
Densities
ESC ]! Begin EVFU Table
Loading ESC [p1 ! p Move to EVFU
Channel
ESC [0 t Select Bar Code
Mode ESC [3 t Deselect Bar Code
Mode
ESC [p1;p...;p10 } Select Bar Code
Parameters ESC [0 | Exit Oversize Printing
ESC [1 | Select Oversize
Character Font (No
Rotation) ESC [2 | Select Oversize
Character Font (90-
Degree Rotation)
ESC [3 | Select Oversize
Character Font (180-
Degree Rotation) ESC [4 | Select Oversize
Character Font (270-
Degree Rotation)