Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 9)

Chapter 1: Control Panel
9
Menu Parameters
Factory settings are marked with *
Parameter group Parameter Description
Print (none) A list of the menus with the current setting is
printed.
Menu Load Menu = 1*
Load Menu = 2
Load Menu = 3
Load Menu = 4
Load Menu = 5 A menu is loaded. Selection between five
menus can be made.
Reset
Reset Menu 1...5
No* Yes The currently selected menu returns to the
default values (factory settings).
Quietm. Quietm. = On
Quietm. = Off* Switches between normal and quiet mode
printing. For all printing modes, the print-out is
made with the bidirectional method in quiet
mode printing. In the first step the first row of
pins is activated, during the second step the
second row is used.
Font Draft
Roman NLQ
Roman LQ
Sans Serif NLQ
Sans Serif LQ
Courier NLQ
Courier LQ
OCR-B NLQ
OCR-B LQ
OCR-A NLQ
OCR-A LQ Selects the character style and its quality.
The abbreviation NLQ stands for Near Letter
print quality, which means that the printer works
faster but with a slightly lower resolution. LQ
stands for Letter Quality, which means that the
resolution is higher at the expense of a slightly
slower speed.
CPI 5 CPI, 6 CPI,
6.67 CPI,
7.5 CPI, 8.6 CPI,
10 CPI*, 12 CPI,
13.3 CPI, 15 CPI,
17.1 CPI, 20 CPI Sets the characters per inch (character pitch).
LPI 1,5 LPI, 2 LPI, 3 LPI,
4 LPI, 5 LPI, 6 LPI*,
8 LPI, 9 LPI, 10 LPI,
12 LPI Sets the lines per inch (line density).
Skip Skip = 0.0 Inch*
Skip = 0.5 Inch
Skip = 1.0 Inch
Skip = 1.5 Inch
Skip = 2.0 Inch
Skip = 2.5 Inch
Skip = 3.0 Inch
Skip = 3.5 Inch Skips the perforation; 7 different values (in
inches) can be defined.
FFatTOF Off
On* Determines whether a Form Feed is invoked at
Top Of Form. When set to Off, a host Form
Feed command is ignored if the current position
is at TOF.
Compr 8 Off*
On Compressed 8 LPI. When set to On, all text
printed at 8 LPI or greater is printed in the
compressed font.