Igp for dot matrix printers user guide – Dascom T2250 User Guide IGP for Dot Matrix Printers User Manual
Page 16

IGP for Dot Matrix Printers
User Guide
16
Parameter group
Parameter
Description
Sl.Zero Off*
On
Selects if normal zero (0) or the slashed zero
(Ø) is printed.
VFU
VFUEnab
VTChan
SkpWhn
Off*
On
1
:
12
Unused
Before*
After
Selects whether VFU is active for use with
Vertical Format Units
Selects the Vertical tab channel
Sets up when paper movement happens on
hitting bottom of form using VFUs
PapOpt ASF-R
ASF-F
Trac2
Trac3
AutoTRA
AutoASF
T2150/T2250
Activation of optional Tractors and Sheet-
Feeders: installed or not installed.
T2265+…T2380
These Parameters only appear if at least one
optional Tractor (TRA) or Sheet Feeder (ASF)
is installed. It regulates the activation of
optional paper ways when there is no more
paper left in one of them:
T1=T2=T3
and/or:
ASF1=ASF2
or:
Off