Escape sequence summary, Chapter 2: emulations – Dascom T2250 User Guide IGP for Dot Matrix Printers User Manual
Page 55

Chapter 2: Emulations
55
Escape Sequence Summary
The following escape sequences are supported:
Sequence
Function
Description
ESC D
Index Forward
Moves the paper forward one line with no change to the
horizontal position.
ESC H
Set Tab
Sets a tab stop at the current horizontal position.
ESC M
Index Reverse Moves the paper backward one line with no change to
the horizontal position.
ESC P@
Align to Line
Boundary
Moves the vertical position to the next line relative to top
of form as defined by the current LPI setting.
ESC PA
Restore
Cursor
Position
Moves the print position to the beginning of the saved
vertical position.
ESC PB
Save Cursor
Position
Saves the current vertical position.
ESC PC
Save Powerup
Configuration
Saves the current configuration into the Powerup
Configuration.
ESC Pb
POSTNET
Mode
Causes the following digits to be printed as POSTNET
bar codes.
ESC Pc
or ESC Pe
UK Post Mode Causes the following digits to be printed as UK postal
bar codes. Special for Tally UK.
ESC Pd
KIX Mode
Causes the following digits to be printed as Dutch KIX
postal bar codes. Special for Tally UK.
ESC Pf
PLANET
Mode
Causes the following digits to be printed as PLANET
postal bar codes.
ESC , A
ESC ( xx
Select G0
Character Set
Selects the G0 character set.
ESC - A
ESC ) xx
Select G1
Character Set
Selects the G1 character set.
ESC [ n z
Select LPI
Selects lines per inch.
ESC [ n w
Select CPI
Selects characters per inch.
ESC [ n m
Select
Attributes
Selects bold, italics, overline, strikethrough, underline,
subscript and superscript attributes. Also DP, Draft,
Gothic, Courier, OCR-A and OCR-B font styles and
downloaded font.
ESC [ n t
Select Form
Length
Select form length. 2 to 255 lines, or 11 inches or 12
inches.
ESC [ n u
Set Tabs
Sets horizontal tab stops.
ESC [ n q
Clear Tabs
Clears horizontal tab stops.
ESC [ 3 g
Clear All Tabs
Clear all tab stops.
ESC [ 0 g
Clear Current
Tab
Clear a tab stop at the current horizontal position.
ESC [ n {
Select Paper
Path
Activates the selected paper input path.
ESC [ 6 ~
Reset
Resets to Powerup Configuration.
ESC [ cn !p
VFU Channel
Command
Performs a VFU channel move.
ESC [ cn !v
Relative Paper
Motion
Performs a relative paper move.