Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 68)

IGP for Dot Matrix Printers User Guide
68
Graphics Language Emulations
Graphics languages are a set of commands used to create graphic images such as large
characters, lines, boxes, and bar codes. A graphics language is run on top of any of the above
underlying control language emulations.
QMS Code V Emulation
This graphics language is an emulation of QMS Code V Version 1 and 2. It is accessible from all
underlying control languages.
The emulation is based on QMS Manual Number 1720155B, QMS Code V Version II
Programming Manual. The commands are defined in Manual Number 079697, Graphics
Applications Manual, Line Printers.
Command Description Inside
Pass
Outside
Pass
^#n Compressed Fonts
^@Cnn Draft Fonts
^@Hn Dump Mode
^@Lnn Lines Per Inch (LPI)
^[nnn Data Field, Buffered Forms
^A Ignore Data Off
^B^-^] Buffered Formatting, Version 1
^B{B,N,O,S,T,Y}9x^G Bar Code Style 1, Horz. Ver. Ratio
^B{B,N,O,S,T,Y}x^G Bar Code Style 1, Horizontal
^Cnn^Z Buffered Form Copy
^C{B,N,O,S,T,Y}9x^G Bar Code Style 1, Vert Var. Ratio
^C{B,N,O,S,T,Y}x^G Bar Code Style 1, Vertical
^D Descender Mode
^~Dhhhvvv Pass Density
^Dnn Dot Slew
^Ehhwwjjd Graphics Pass, Vertical Left
^F Free Format
^~FF Full Space Font Mode
^~FH Half Space Font Mode
^~FQ Quality Font Mode
^G Command Terminator
^Hnn Form Length
^Hnn Pass Length