Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 21)

Chapter 1: Control Panel
21
PJL Functions
The following PJL commands are implemented:
Command Short description T2x80(+)
T2x65(+)
T2x50
Line
printer
"ESC"%-12345X@PJL Universal Exit Language (UEL)
Commands X X
@PJL ECHO ECHO Command X X
@PJL EOJ
@PJL EOJ NAME= EOJ (End of Job) Commands: X
X X
X
@PJL INFO STATUS INFO (Information Request)
Command X X
@PJL INFO CONFIG INFO of the printer configuration X -
@PJL INFO VARIABLES INFO of varibles which can be set
by SET X -
@PJL INFO MEMORY INFO about the Memory of the
printer X -
@PJL RDYMSG DISPLAY = RDYMSG (Ready Message)
Command - X
@PJL USTATUS DEVICE = ON
@PJL USTATUS DEVICE = OFF
@PJL USTATUS DEVICE =
VERBOSE
@PJL USTATUS JOB = ON
@PJL USTATUS JOB = OFF
@PJL USTATUS PAGE = ON
@PJL USTATUS PAGE = OFF
@PJL USTATUSOFF USTATUS (Unsolicited Status)
Commands X
X
X
X
X
X
X
X X
X
X
X
X
X
X
X
@PJL JOB NAME =
@PJL JOB FILE =
@PJL JOB START =
@PJL JOB END =
@PJL JOB COPY = JOB (Start of Job) Commands X
X
X
X
-
X
X
X
X
X
@PJL ENTER LANGUAGE Exit PJL and start normal parser X -
@PJL INFO USTATUS X X
@PJL USTATUS TIMED X X
The PJL functionality works with the internal and external (TallyCom III) ethernet interface and
can be switched on/off via the new setting JobCntrl (in the online menu). Default is “off”.