Hspa modem interface, Hspa modem interface installation, Hspa modem interface installation” on – chiliGREEN W871CU User Manual
Page 274: Dhspa modem interface

Windows 7 Information
D - 56 3.75G/HSPA Module (Win 7)
D
HSPA Modem Interface
With the 3.75G/HSPA module and USIM card (supplied by your service provider)
installed you may then install the HSPA Modem Interface. The HSPA Modem In-
terface allows you to directly access your HSPA internet service from the computer.
HSPA Modem Interface Installation
1. Enable power to the module by pressing the Fn +
key combination (the
on-screen indicator will indicate the module’s power status). If a Found New
Hardware window appears, click Cancel in all windows that appear, and
then proceed to install the driver as below.Insert the Device Drivers & Utili-
ties + User’s Manual disc
into the CD/DVD drive.
2. Click Option Drivers (button).
3. Click 4.3.5 Generation Module > Yes.
4. Click Next > Install.
5. Click Finish to restart the computer.
6. Access the HSPA Modem Interface from the Start menu (Start > Pro-
grams/All Programs > HSPA modem), or by double-clicking the HSPA
modem icon on the desktop.
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn +
key com-
bination to toggle power to
the 3.75G/HSPA module,
and check the indicator to
see if the module is pow-
ered on or not (see
).