Model b – chiliGREEN W871CU User Manual
Page 102
Upgrading The Computer
6 - 6 Upgrading the Hard Disk Drive(s)
6
Removing the Hard Disk in the Secondary HDD Bay (Model B Computers Only)
If you want to configure your hard disks in a RAID configuration then install iden-
tical drives in the primary (see page
) and secondary hard disk bays as per the
instructions here. Follow the instructions in
for configuration details. Note a RAID configuration is only
supported by Model B computers.
1.
Turn off the computer, and turn it over and remove the battery.
2.
Locate the component bay cover and remove screws
-
.
3.
Carefully remove the cover
.
RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.
Figure 6 - 4
Component Bay
Cover Screws
1
11
12
3
1
2
Model B
Model B
5
2
1
4
6
7
8
9
3
10
11
12