Usim card installation, Usim card installation -41, 7usim card installation – chiliGREEN W871CU User Manual
Page 149: Model a
Modules & Options
3.75G/HSPA Module 7 - 41
7
USIM Card Installation
1.
Turn off the computer, and turn it over and remove the battery (see
).
2.
The SIMLOCK is located in the compartment under the battery.
3.
Remove screw
from the SIMLOCK cover, and remove the cover.
4.
Insert the USIM card as you would into your mobile phone.
Power Safety
Warning
Before you undertake
any installation proce-
dures, make sure that
you have turned off the
power, and disconnect-
ed all peripherals and
cables (including tele-
phone lines). It is advis-
able to also remove your
battery in order to pre-
vent accidentally turning
the machine on.
Figure 7 - 32
Battery & SIMLOCK
Cover Removal
1
Model A
SIMLOCK Location
1
This manual is related to the following products: