chiliGREEN W871CU User Manual
Page 203
NVIDIA Video Driver Controls
Attaching Other Displays B - 9
B
Enabling Clone Mode
1.
Attach your external display to the DVI-Out Port or HDMI-Out port, and turn it on.
2.
Go to NVIDIA Control Panel (see
“NVIDIA Control Panel” on page B - 2
3.
Double-click Display (if the sub-menus are not visible), and then click Set up
multiple displays.
4.
Any attached display will appear under “1.Select the displays you want to use.”
5.
Click the tickbox alongside any display you wish to use.
6.
Click Apply > Yes to save the changes.
7.
The default display mode will be in Extended mode, to change to Clone Mode
right-click one of the display icons and click “Clone Laptop Display and....” (a tick
will appear alongside it) option from the pop-up menu and click Apply.
Figure B - 7
Enable Clone Mode