chiliGREEN W871CU - Manual (Page 151)

Modules & Options
3.75G/HSPA Module 7 - 43
7
HSPA Modem Interface
With the 3.75G/HSPA module and USIM card (supplied by your service provider)
installed you may then install the HSPA Modem Interface. The HSPA Modem In-
terface allows you to directly access your HSPA internet service from the computer.
HSPA Modem Interface Installation
1. Enable power to the module by pressing the Fn + key combination (the
on-screen indicator will indicate the module’s power status). If a Found
New Hardware window appears, click Cancel in all windows that appear,
and then proceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 4.3.5 Generation Module > Yes.
4. Click Next > Install.
5. Click Finish to restart the computer.
6. Access the HSPA Modem Interface from the Start menu (Start > Pro-
grams/All Programs > HSPA modem), or by double-clicking the HSPA
modem icon on the desktop.
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + key com-
bination to toggle power to
the 3.75G/HSPA module,
and check the indicator to
see if the module is pow-
ered on or not (see
Table 1
- 6, on page 1 - 12 / Table 1
- 4, on page 1 - 9 ).