chiliGREEN W871CU User Manual
Page 148
Modules & Options
7 - 40 3.75G/HSPA Module
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn +
Key Indicators” on page 1 - 12
) to toggle power to the 3.75G/HSPA module.
When the 3.75G/HSPA module is powered on, the on-screen indicator will briefly be
displayed. Make sure you install the drivers in the order indicated in
. Note that exiting the application does NOT turn off the 3.75G/HSPA
module.
• HSPA Modem Interface - See
“HSPA Modem Interface Installation” on
for driver installation information and
for instructions on using the HSPA Modem Interface.
• Mobile Partner - See
“Mobile Partner Application Installation” on page 7 -
for driver installation information and
“Mobile Partner Application” on
for instructions on using the Mobile Partner application.
3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules DO NOT support
system wake up on
3.75G/HSPA modem ac-
tivity.