beautypg.com

Figure 7 - 53, Raid created – chiliGREEN W871CU User Manual

Page 172

background image

Modules & Options

7 - 64 Setting Up SATA RAID or AHCI Modes

7

10. This will now return to the main menu.

11. Select 6.Exit and press Enter, then press Y to exit the RAID configuration menu.
12. As the computer starts up, press a key when you see the message "Press any

key to boot from CD".

13. Press Enter to continue installing the operating system as normal (see your

Windows documentation if you need help on installing the Windows OS).

14. Install the Windows drivers from the Device Drivers & Utilities + User’s Manual

disc as per

Table 4 - 1, on page 4 - 3

.

15. After installing all the necessary system drivers you need to install the Intel Matrix

driver (see

“Intel Matrix Driver Installation” on page 7 - 65

).

Figure 7 - 53

RAID Created

RAID Volumes:
ID

Name

Level

Strip

Size

Status

Bootable

0

MyRAID

RAID1(Mirror)

N/A

111.8GB

Normal

Yes

Physical Disks:
Port Drive Model

Serial

#

Size

Type/Status(Vol ID)

0

FUJITSU MHY2120B K404T812PPG5

111.7GB

Member Disk(0)

4

FUJITSU MHY2120B K404T7C2KJKJ

111.7GB

Member Disk(0)

Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1021

Copyright (C) 2003-09 Intel Corporation. All Rights Reserved.

[ MAIN MENU ]

[ DISK/VOLUME INFORMATION ]

[

]-Select

[ESC]-Exit

[ENTER]-Select Menu

1.

Create RAID Volume

4.

Recovery Volume Options

2.

Delete RAID Volume

5.

Acceleration Options

3.

Reset Disks to Non-RAID

6.

Exit

This manual is related to the following products: