chiliGREEN W871CU - Manual (Page 192)

Interface (Ports & Jacks)
A - 2 Interface (Ports & Jacks)
A
DC-In Jack Plug the supplied AC/DC adapter into this jack to power your computer.
DVI-Out Port The DVI-Out (Digital Visual Interface) Port (at the rear of the computer) allows you to connect an
external monitor, or Flat Panel Display, to allow dual video or simultaneous display on the LCD
and external monitor/FPD
(see “Display Devices” on page B - 5 ). If you are using an older type
of monitor you will need to use a converter to convert the signal from DVI to VGA.
e-SATA Port Plug external Serial ATA hard drives into this e-SATA (external Serial Advanced Technology
Attachment) port.
HDMI-Out Port The HDMI-Out (High-Definition Multimedia Interface) is an audio/video connector interface for
transmitting uncompressed digital streams. This allows you to connect an external monitor, TV or
Flat Panel Display etc. as a display device
by means of a HDMI cable. Note that HDMI carries
both audio and video signals (see “HDMI Audio Configuration” on page B - 11 ).
Headphone-Out Jack Headphones or speakers may be connected through this jack. Note: Set your system’s volume to
a reduced level before connecting to this jack.
Line-In Jack The Line-In jack allows you to play audio sources through the computer’s speakers. Note that
audio input through Line-in will default to the mute setting. To set up your audio sources to play
through the Line-in jack go to the Sound
control panel and make sure the Mute box is not
ticked.
Item Description