Upgrading the hard disk drive(s), Upgrading the hard disk drive(s) -4, Model b – chiliGREEN W871CU User Manual
Page 100
Upgrading The Computer
6 - 4 Upgrading the Hard Disk Drive(s)
6
Upgrading the Hard Disk Drive(s)
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard
disk drives with a height of 9.5mm (h) (see
). Follow your
operating system’s installation instructions, and install all necessary drivers and util-
ities (see
“Driver Installation” on page 4 - 2
), when setting up a new hard disk.
Removing the Hard Disk(s) in the Primary HDD Bay
1.
Turn off the computer, and turn it over and remove the battery.
2.
Remove screws
-
from the hard disk cover.
3.
Slide the hard disk assembly in the direction of arrow
.
HDD System
Warning
New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
Figure 6 - 2
Hard Disk Bay
Cover Removal
1
2
3
Model B
3
1
2