Ul9010 ultra-lok, Tool, Clamp application free-end clamps – BAND-IT UL9010 Ultra-Lok Tool User Manual
Page 10
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-0307 USA
Ph: 1-800-525-0758
Fax: 1-800-624-3925
Document # P44987 Rev. N
© Copyright
BAND-IT-IDEX, Inc. 2011
All rights reserved
www.BAND-IT-IDEX.com
Page 10 of 14
UL9010
Ultra-Lok
Tool
Clamp Application
Free-End Clamps
Inspect buckle on completed clamp and tap down buckle shroud.
FRONT VIEW
Completed Free-End Clamp
(Visually inspect lock)
Buckle Shroud
Lock sheared in center
and formed inside
shroud
SIDE VIEW
Completed Free-End
Clamp with buckle
shroud tapped down
as required
Completed clamp
should appear as
shown.
Important: Visually inspect lock formed in band as shown. If lock has slipped under the sheared surface of the
buckle, remove clamp and install a new one at reduced tension by lowering the drill clutch torque setting.
Shear Surface
Section View
Proper clamp
Installation
Section View
Defective Clamp
installation
Lock has slipped back
under sheared buckle
surface
- A92079 Tie-Lok II (4 pages)
- A94079 Ultra-Lok (4 pages)
- A95079 Band-Lok (3 pages)
- Ball-Lok Ties Installation (1 page)
- Ties Installation (1 page)
- Ball-Lok Installation (1 page)
- BT1000 Boss Tool (11 pages)
- C00169 banding (2 pages)
- C00169 Hand Tool (4 pages)
- C00269 JR. Hand Tool (3 pages)
- C00369 Heavy Duty Tool (4 pages)
- C06599 Tension Limiter (2 pages)
- C07569 Bantam Hand Tool (3 pages)
- C08569 Bantam Strapping Hand Tool (4 pages)
- C40099 Ratchet Banding Tool (1 page)
- CB1000 Hand Tool (4 pages)
- D50089/99 Bolted Band Retainer (1 page)
- D51089 (1 page)
- G40269 Giant II Hand Tool (3 pages)
- Gripper Installation (1 page)
- ID200 Series Imprinter (14 pages)
- ID3016 ID Tag Imprinter (1 page)
- ID4002 SS Tape Embosser (2 pages)
- IT0750-AB Mini Tie-Lok Tool (38 pages)
- IT1000-AB 1/4 Tie-Lok Tool (38 pages)
- IT2000-AB 1/4 Junior Tool (38 pages)
- IT3000-AB 1/4 Ultra-Lok Tool (28 pages)
- IT4000-AB 5/16 Band-Lok Tool (28 pages)
- IT5000-AB 3/8 Junior Tool (38 pages)
- IT6000-AB 3/8 Tie-Lok Tool (38 pages)
- J00169 JR. Tool Adapter (2 pages)
- J02069 Pok-It II Tool (2 pages)
- J05069 Heavy Duty Adapter (2 pages)
- J07589/99 Thriftool (2 pages)
- J93099 Cutter Blade Kit (2 pages)
- K50289 Ball-Lok/Self-Lok Tool (5 pages)
- M15650 Scru-Band Kit (1 page)
- M21050 Scru-Seal (1 page)
- M50389 Multi Lok Tool (5 pages)
- Q Band Installation (1 page)
- S03869 Center Punch Tool (2 pages)
- S100 Classic Air Tool (18 pages)
- S35099 Automatic Air Tool (34 pages)
- S75099 Pneumatic Junior Clamp Application Tool (21 pages)
- Shield-Lok SL4099 Tool Pack (15 pages)