It3000-ab, Warranty & safety guidelines, 3 of 28 – BAND-IT IT3000-AB 1/4 Ultra-Lok Tool User Manual

Page 3: 1/4” ultra-lok tool safety guidelines, Warranty

Document # I17793 Rev D

BAND-IT-IDEX, Inc. 2009

www.BAND-IT-IDEX.com

BAND-IT-IDEX, Inc.

A Unit of IDEX Corporation

4799 Dahlia Street Denver, CO 80216-0307 USA

P: 1-800-525-0758 F: 1-800-624-3925

3 of 28

IT3000-AB

1/4” Ultra-Lok Tool

Safety Guidelines

• Read this manual and become familiar with the tool before installing any

clamps.

• Protective eyewear should be worn when connecting and disconnecting

the tool to compressed air sources and during operation.

• Wear appropriate gloves for handling steel while operating this tool,

applying stainless steel clamps and removing scrap clamp tail.

• Clamp tensioning can be immediately stopped by releasing the tool

trigger system.

• When applying clamps, care should be taken to insure fingers and loose

clothing are not in the way of the clamp being applied.

• Never attempt to clamp objects which have a potential to burst, shatter

or otherwise cause bodily harm.

• Disconnect air supply and electrical power prior to maintenance and

disassembly of tool components.

• Liquids or lubricants should never be put into the air lines.

Warranty:

For Warranty information visit the following URL

www.BAND-IT-IDEX.com/Warranty.html

Warranty &
Safety Guidelines