Atop Technology SW550XC User manual User Manual
Page 92
Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
87
7. Users can check connection situation by LED status. The follow table represents the
meaning of LED color.
Table 5.12
※ Limitation
After pressing WDS button, the whole pairing sequence time is 120 seconds, which
means user has to set both device in 120 seconds or pairing will be failed.
WDS protocol doesn’t support making multi AP to AP client link in the same time,
pairing two or more devices in the same time might cause pairing failed.
For two pairing SW550XC COM port, device A COM1 will only reflect to device B
COM1. Same rule as COM2 to COM2.
SW550XC AP mode is simulated by software, so if the device is restarted, the
setting will not be recovered.
The pairing time might be influenced by environmental complexity.
LED State
Color
Off
Blinking
On
Orange P2P is not enabled.
P2P is connecting at
Soft AP mode
Device’s P2P mode is
enabled in Soft AP mode.
Green
P2P is not enabled.
P2P is connection at
Client mode
Device’s P2P mode is
enabled in AP client mode.