Atop Technology SW550XC User manual - Manual (Page 100)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
95
6.2.3 Configuring VCOM Ports
If the serial device server is running in TCP Server mode (recommended), a Serial/IP
should be the TCP Client connecting to the serial device server. Enable Connect to
Server and enter the IP Address of the serial device server with the Port Number
specified. The Port Number here is the Local Listening Port for the serial device
server.
If the serial device server is running in TCP Client mode, Serial/IP should be the TCP
Server waiting for a serial device server to connect it. Enable Accept Connections
and enter the Port Number. The Port Number here is the Destination Port of the
serial device server. Do not enable Connect to Server and Accept Connections
together.
Figure 6.8