Atop Technology SW550XC User manual - Manual (Page 91)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
86
3. SW550XC can be assigned to different mode by pressing P2P button; the following table
shows the timing relationship.
Table 5.11
Pressing seconds 1~3(s) 4~7(s) 8~(s)
Working mode Restart connection AP(Wi-fi direct) AP client
4. SW550XC can make WIFI connection just by pressing P2P button. To set AP mode, press
P2P button for 4~7 seconds. To set as AP client, press over 8 seconds. If user wants the
AP connect to other clients, just press 1~3 seconds to restart connection.
5. Before building serial auto link, please make sure SW550XC COM port has connected to
RTU. The rest connection steps are the same as WIFI direct, please refer to steps “4”.
6. Software will establish a new SSID for WIFI Direct and Serial Auto Link. For SW550XC,
SSID would be “DIRECT - Xx” Xx is two random alphabet.
Figure 5.31