APG IRU-9400 user manual - Manual (Page 35)

Rev. B1, 3/10 IRU Series
35
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• IRU-6429 Specifications
Detection Range: 1 to 30 ft. (0.3 to 9.1 m)
Outputs: 0-2.5 Vdc or 0-5 Vdc (software selectable)
Operating Voltage: 12-28 Vdc
Programming Voltage: 15-28 Vdc (RST), 12-28 Vdc (RS-232)
Operational Current Draw (without communications): 70 mA @ 24 Vdc
Maximum Power Rating: 2.5 W
Housing: Polycarbonate/PET blend
Mounting: 2 in. NPT (front), 3/4 in. NPT (rear)
Transducer Type: PVDF faced ceramic
Ingress Rating: IP65
Approvals: CSA C/US General Purpose
Sample Rate: 1 to 15 Hz (programmable)
Response Time: Programmable (67 ms minimum)
Resolution: 0.1 in. (2.5 mm)
Accuracy: +/- 0.25% of detected range (with no temperature gradient)
Sensor Adjustments: USB (requires RST-3001) or RS-232 (IRU-6429S only)
Operating Temperature: -40 to 140 0 F (-40 to 60 0 C)
Beam Pattern: 9 0 off-axis (at maximum pulses and sensitivity settings)
Electrical Connection: Pigtail or micro-connector
Frequency: 69 kHz