APG IRU-9400 user manual User Manual
Page 31
Rev. B1, 3/10
IRU Series
31
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• IRU 3000 Series Specifications
Detection Range: 1.50 to 50 ft. (0.46 to 15.24 m)
Available Outputs:
4-20 mA
4-20 mA + (2) NPN Trip Points (300 mA max.)
Operating Voltage: 12-28 Vdc
Programming Voltage: 15-28 Vdc
Operational Current Draw (without communications): 70 mA @ 24 Vdc
Maximum Power Rating: 2.5 W
Housing:
IRU-3100 Series: PVC
IRU-3400 Series: Polycarbonate/PET blend
Mounting:
IRU-3100 Series: 3 in. NPT (front), 1 in. NPT (rear)
IRU-3400 Series: 3 in. NPT (front), 3/4 in. NPT (rear)
Transducer Type: PVDF (3400 series) or PVC (3100 series) faced ceramic
Ingress Rating: IP65
Hazardous Location Approvals (CSA C/US):
General Purpose (all models)
Class I, Div. 2, Groups C & D, T6; Ex nA IIB T6, IP65; Class I Zone 2;
AEx nA IIB, T6 (models IRU-3135, IRU-3433, IRU-3435 only)
Sample Rate: 1 to 22 Hz (programmable)
Response Time: Programmable (45 ms minimum)
Resolution: 0.1 in. (2.5 mm)
Accuracy: +/- 0.25% of detected range (with no temperature gradient)
Sensor Adjustments: USB (requires RST-3001)
Operating Temperature: -40 to 140
0
F (-40 to 60
0
C)
Beam Pattern: 9
0
off-axis (at maximum pulses and sensitivity settings)
Electrical Connection: Pigtail or micro-connector
Frequency: 43 kHz