APG IRU-9400 user manual - Manual (Page 33)

Rev. B1, 3/10 IRU Series
33
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• IRU-5000 Series Specifications
Detection Range: 4 to 79 in. (102 to 2700 mm)
Available Outputs:
4-20 mA
4-20 mA + (2) NPN Trip Points (300 mA max.)
0-2.5 Vdc or 0-5 Vdc (software selectable)
Operating Voltage: 12-28 Vdc
Programming Voltage: 15-28 Vdc
Operational Current Draw (without communications): 60 mA @ 24 Vdc
Maximum Power Rating: 2.5 W
Housing: Polycarbonate/PET blend
Mounting:
IRU-5410 Series: 1 in. NPT (front), 3/4 in. NPT (rear)
IRU-5420 Series: 2 in. NPT (front), 3/4 in. NPT (rear)
IRU-5320 Series: 2 in. Tri-Clamp
Transducer Type: PVDF faced ceramic
Ingress Rating: IP65
Hazardous Location Approvals (CSA C/US):
General Purpose (all models)
Class I, Div. 2, Groups C & D, T6; Ex nA IIB T6, IP65; Class I Zone 2;
AEx nA IIB, T6 (models IRU-5413, IRU-5415, IRU-5423, IRU-5425 only)
Sample Rate: 1 to 50 Hz (programmable)
Response Time: Programmable (20 ms minimum)
Resolution: 0.1 in. (2.5 mm)
Accuracy: +/- 0.25% of detected range (with no temperature gradient)
Sensor Adjustments: USB (requires RST-3001)
Operating Temperature: -40 to 140 0 F (-40 to 60 0 C)
Beam Pattern: 9 0 off-axis (at maximum pulses and sensitivity settings)
Electrical Connection: Pigtail or micro-connector
Frequency: 143 kHz