APG IRU-9400 user manual - Manual (Page 29)

Rev. B1, 3/10 IRU Series
29
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• IRU 2000 Series Specifications
Detection Range: 1 to 25 ft. (0.3 to 7.62 m)
Available Outputs:
4-20 mA
4-20 mA + (2) NPN Trip Points (300 mA max.)
RS-485 + (1) NPN Trip Point (300 mA max.)
Solid State Relay (130 mA max., 120 V AC or DC)
Operating Voltage: 12-28 Vdc
Programming Voltage: 15-28 Vdc
Operational Current Draw (without communications): 70 mA @ 24 Vdc
Maximum Power Rating: 2.5 W
Housing:
IRU-2000 Series: ABS
IRU-2100 Series: PVC
IRU-2400 Series: Polycarbonate/PET blend
Mounting:
IRU-2000 Series: Surface Mount (4 bolt)
IRU-2100 Series: 2 in. or 3 in. NPT (front), 1 in. NPT (rear)
IRU-2400 Series: 2 in. NPT (front), 3/4 in. NPT (rear)
Transducer Type: ABS (2000 series), PVC (2100 series) or PVDF (2400 series)
faced ceramic
Ingress Rating: IP65
Hazardous Location Approvals (CSA C/US):
General Purpose (all models)
Class I, Div. 2, Groups C & D, T6; Ex nA IIB T6, IP65; Class I Zone 2;
AEx nA IIB, T6 (models IRU-2125, IRU-2423, IRU-2425 only)
Sample Rate: 1 to 22 Hz (programmable)
Response Time: Programmable (45 ms minimum)
Resolution: 0.1 in. (2.5 mm)
Accuracy: +/- 0.25% of detected range (with no temperature gradient)
Sensor Adjustments: USB (requires RST-3001)
Operating Temperature: -40 to 140 0 F (-40 to 60 0 C)
Beam Pattern: 9 0 off-axis (at maximum pulses and sensitivity settings)
Electrical Connection: Pigtail or micro-connector
Frequency: 69 kHz