AirLive SNMP-GSH2004L - Manual (Page 7)

1. Introduction
AirLive SNMP-GSH2004L User’s Manual 2
- 1000Mbps LC, Multi-Mode, SFP Fiber transceiver
- 1000Mbps LC, Single-Mode, SFP Fiber transceiver, 10km
- 1000Mbps LC, Single-Mode, SFP Fiber transceiver, 30km
- 1000Mbps LC, Single-Mode, SFP Fiber transceiver, 50km
- 100Mbps LC, Multi-Mode, SFP Fiber transceiver, 2km
- 100Mbps LC, Single-Mode, SFP Fiber transceiver, 30km
This user’s manual will help you to uncover most functions of the SNMP-GSH2004L with
step-by-step instructions presented by high quality illustrations. Thank you for choosing
OvisLink’s product.
1.2 Guide to the Chapters
„
Chapter 1: Introduction and Quick Setup guide. All the essential information including
IP Address and Password information are in the Quick Setup section.
„ Chapter 2: Detail installation instruction.
„ Chapter 3: LED indicators
„ Chapter 4: Detail information on Web management including how to setup remote
management.
1.3 Quick Setup
This section provides the essential information for experienced users to operate the switch
immediately. For detailed installation instruction, please see chapter 2 for more information.
Power-On the switch
„ The SNMP-GSH2004L has a built-in power supply to operate with 100 ~ 240V AC, 50 ~
60Hz power source.
„ The AC power cord connector is located at the rear of the unit and the On/Off switch is
next to the connector.
„ After the Switch is powered on, it will perform “self-diagnostic” test. This process takes
about 5 seconds to complete.
The default IP address: 192.168.2.1
The default password is airlive
Important Information