AirLive SNMP-GSH2004L - Manual (Page 19)

4. Web Management
AirLive SNMP-GSH2004L User’s Manual 14
:
Click “Ok” after finish entering the IP.
Note: The SNMP-GSH2004L has DHCP client ability. This allows DHCP server (or router)
ow, you will be able to access the switch by typing in the switch’s IP address on the web
IP Address: 192.168.2.50
Subnet Mask 255.255.255.0
Gateway: 192.168.2.1
*
to assign IP automatically. However, we do not recommend turning on the DHCP client
because the DHCP server assign the IP randomly. The DHCP client should be used only
when connecting directly to Cable Modem (for remote management) whose service
provider uses DHCP for IP assignment.
N
browser.
4.2 Remote Management
this section, you will learn how to setup your computer and the router for remote web
e,
In
management. Remote management allows MIS to manage a switch from outside of the
switch’s IP domain or from Internet. Depending on the type of Internet connection you hav
there are two ways to setup the switch to be available through Internet.
Direct Connection to Interne
you have a fixed IP xDSL account or cable modem account, and there is no router in the If
network, you can connect your switch directly to Internet via xDSL modem/Cable Modem.
However, this method is not recommended as the LAN will be directly exposed to the
Internet.